VentPuck

A round touch-screen OBD2 gauge that sits in the air vent of my Megane RS

I drive a Renault Megane RS and I wanted to see things like boost and oil temperature while I’m driving, without bolting a gauge pod to the dash or having a phone propped up on the vent.

So I’m building VentPuck, a small round gauge that sits in one of the air vents and reads live data from the car.

It’s built around an ESP32-S3 with a 1.75” AMOLED round touch display with a resolution of 466x466. The car’s data comes over any Bluetooth OBD2 adapter that supports BLE, so the only wires to the gauge itself are for power. The home screen shows four readings you choose, and you swipe between the other screens: boost, a big oil and coolant temperature screen, intake air temperature, RPM, speed, battery voltage, and a screen showing engine load and throttle position together. Most of them keep oil and coolant temperature visible at the bottom. There is also a 0-60 timer that saves your best time, and a fault codes screen that can scan and clear codes. If the car reports the outside air temperature, it is shown small in the corner of every screen, and it simply isn’t there if the car doesn’t have it.

The interface is written with LVGL, with a smooth slide between screens, a dark mode with a choice of accent colours, and a boot animation that can use your own logo. Press and hold on any screen for the settings menu, where you can change the car, units, brightness and more.

Everything that’s specific to a car lives in a vehicle setting, so it’s easy to adapt to other cars. The Megane 3 RS is the first, and it reads oil temperature, boost, battery voltage and barometric pressure straight from the engine ECU. A generic OBD2 mode works on other cars. The BMW E8x, Clio 4 RS and Megane 4 RS are in as well while people test them: the Clio 4 RS and Megane 4 RS use the same engine ECU requests as the Megane 3 RS, and the BMW has an experimental oil temperature request that tries several ways of talking to the engine computer and uses whichever one answers.

VentPuck can also update itself over Wi-Fi from the GitHub releases, with a Release channel and a Beta channel for test builds, so anyone testing doesn’t have to keep flashing it over USB.

It’s still a work in progress, and I’m planning a few more things like fault code descriptions and more car specific readings as people test it on other cars.

All the code is on the repo page.

Here’s the repo below.

VentPuck

Changelog

Latest Update

Version 1.0.1.0

  • 1.0.1.0 Throttle position now learns your car’s closed position and shows it as 0%, instead of around 15% with your foot off.
  • 1.0.1.0 Load and throttle readings are now included in the serial and SD card log, along with the raw throttle value.

Older Updates

Version 1.x - Initial Release

Version 1.0.0.0 - Initial Release

  • 1.0.0.0 Inital Release of VentPuck
🍺 If this project has been helpful and you enjoy what I do and want to support me I would really appriciate it! 🔽 Support Me!
Support Me!