Retrofit Powerfold Mirrors Renault Megane MK3

It annoyed me that my RS didn’t have folding mirrors, so I retrofit them. There isn’t, or wasn’t any info on doing this at the time I did it, so I decided to make a guide.

Check your looms

First of all, you need to check if you have the correct looms. Mine did but I’m not sure if all models do or only RS models. Take this panel off on both sides.

Renault Megane MK3 Inner Mirror Cover
The inner mirror cover for the Renault Megane MK3.
Renault Megane MK3 Inner Mirror Cover Removed
The inner mirror cover for the Renault Megane MK3 removed revealing the mirror plug.

Now you can check the loom for the correct wire.

Renault Megane MK3 Drivers Side Mirror Loom
The drivers side loom with the needed wire circled.
Renault Megane MK3 Passenger Side Mirror Loom
The passenger side loom with the needed wire circled.

Parts you need

If you have the correct loom then you just need to get new mirrors and the driver’s window switch controls.

Renault Megane MK3 Folding Mirror Controls
The Renault Megane MK3 folding mirror controls, part number is 809610009R.

I’ve circled the pin you need to look for on each mirror to make sure they’re electric folding compared to a non-folding version.

Renault Megane MK3 Drivers Side Mirror Plug
The drivers side mirror plug with the needed pin circled.
Renault Megane MK3 Passenger Side Mirror Plug
The passenger side mirror plug with the needed pin circled.

Coding with DDT4ALL

Once you’ve swapped the mirrors it will require coding with either CLIP or DDT4ALL, I’ve not used CLIP so the tutorial will be with DDT.

You need to get a special adapter used on Fords as Renault and Ford share an OBD2 pinout. You can get them on eBay for around a tenner. Search Ford ELM327 on eBay and you should find a USB to OBD2 adapter.

Install DDT4ALL, link to the software and some databases.

I’m not going to go through a complete tutorial on how to use the software, if you need to learn then use this guy on YouTube, he’s not English but you can still follow along pretty easily.

You need to go to DDCM > Driver DCM X95 SLOT v4.0 > DCM Configuration > Write Configuration Select the correct options for your car and then press send

DDT4ALL Folding Mirror Coding
The config for the folding mirror control in DDT4ALL.

If you get an error that you need expert mode it’s the second option along the top, the weird black and white face and make sure your ignition is on but the engine is not.

I’m happy to help anyone if you can’t get it working, just send me an email at info@professorshroom.com.

Disclaimer: This guide is provided for information only, and you follow it entirely at your own risk. Writing coding changes to your car’s ECUs can cause unexpected behaviour, and I can’t be held responsible for any damage to your vehicle, loss of data or warranty, or anything else that results. These steps worked for me on my own car, but that’s no guarantee they’ll work on yours. Always back up your original configuration before changing anything, and if you’re not comfortable doing this yourself, speak to a professional.

🍺 If this post has been helpful and you enjoy what I do and want to support me I would really appriciate it! 🔽 Support Me!
Support Me!